Mitsubishi Electric Installation. Central Auckland.

Mitsubishi Electric Heat Pump Installation Mt Eden

Mitsubishi Electric is the brand I see most in Auckland homes and there's a reason for that. They keep heating properly when it gets cold outside, where cheaper units start struggling. Quiet indoors, solid warranty, and parts are easy to get hold of when something needs fixing down the track.

Full Mitsubishi Electric Range
EPA Licensed Installer
12-Month Workmanship Guarantee
Free Installation Quotes

Why Kiwis Keep Coming Back to Mitsubishi Electric

Mitsubishi Electric has won the Reader's Digest Most Trusted Heat Pump Brand award nine times in eleven years. That is not marketing, that is Kiwi homeowners voting with their wallets after living with the units. Here is what keeps them at the top.

Noise

Ever been woken up by a heat pump cycling on at 2am?

The AP Smart runs at 18dBA indoors. A quiet bedroom sits around 30dBA. This unit runs below that threshold. You can leave it on overnight in a bedroom next to a sleeping child and not hear it.

Running Cost

Your power bill goes down, not just the temperature

For every $1 of electricity used, you get $3 to $5 of heat back. That is how heat pumps work. Mitsubishi Electric's EcoCore inverter pushes toward the higher end by adjusting constantly rather than blasting on and off at full power.

Cold Nights

Still heating properly at 11pm on a July night

Most heat pumps lose grunt as the temperature drops below 5 degrees outside. HyperCore technology keeps producing full output well below zero. The nights you most need the heat are exactly when this matters.

Neighbours

The outdoor unit is as quiet as the indoor one

Mitsubishi Electric engineers both units for quiet operation. My Mt Eden specialist positions the outdoor unit carefully relative to your boundary and your neighbours' windows. Nobody wants to be the house on the street that keeps everyone up.

Control

Turn it on before you leave work so it's warm when you get home

The AP Smart has built-in wifi and energy monitoring. Set a schedule, control it from your phone, or check what it cost to run last week. No extra hardware, no subscription, it is all in the app.

Warranty

Five years of cover on parts and labour if it ever breaks

Mitsubishi Electric backs every residential unit with a 5-year parts and labour warranty in NZ. If the unit develops a fault in that time the repair bill does not come back to you. And if it was installed through me, you call us directly.

Which Model Is Right for Your Home?

Mitsubishi Electric make more residential models than most brands. The differences between them matter. Here is what each one does and who it suits.

AP Smart Series

High Wall · Most Popular
  • 18dBA indoors, the quietest certified unit in NZ, you will not hear it running
  • Energy monitoring built in so you can see exactly what it costs to run
  • Inverter compressor adjusts constantly, so it uses less power than older on/off units
  • Dual Barrier Coating on the coil repels dust and oil, so efficiency does not drop over time
  • Connects to your phone via the app, no extra hardware needed
  • Available 2.5kW to 7.8kW, covers most NZ room sizes
Good for: bedrooms, lounges, anyone who has ever been woken up by a noisy heat pump

EF Designer Smart Series

High Wall · Designer
  • Black Diamond, Matte Silver or Glossy White finish, designed to suit a modern interior rather than clash with it
  • 25% slimmer than a standard unit, sits closer to the wall
  • 3D i-See Sensor scans where people are in the room and directs airflow there, not at an empty wall
  • Same heating output and efficiency as the AP Smart
  • Energy monitoring and wifi built in
Good for: living areas where a white box on the wall would look out of place

LN Black Diamond Smart Series

High Wall · Premium
  • Mitsubishi Electric's top residential model
  • Plasma Quad Plus filtration captures particles 30 times smaller than a human hair, including viruses and bacteria
  • 3D i-See Sensor adjusts airflow automatically as people move around
  • Heats or cools specific zones of a room rather than blasting the whole space
  • Full wifi, energy monitoring and weekly scheduling built in
Good for: households where air quality matters, anyone with allergies or asthma

KW RapidHeat Smart Series

High Wall · Fast Heat
  • Gets to your target temperature faster than the AP Smart, noticeable in rooms that get very cold overnight
  • HyperCore technology maintains full heating output below zero, most units lose grunt below 5 degrees
  • Higher capacity models available for larger rooms
  • Good choice for south-facing rooms that see little sun in winter
  • Wifi, scheduling and auto-restart after power cuts built in
Good for: rooms that are hard to heat, cold southerly-facing spaces

MFZ-KW Floor Console

Floor Mounted
  • Sits at floor level so no drilling high on the wall, good for older NZ homes with plaster or solid walls
  • 18dBA on lowest setting, as quiet as the AP Smart
  • Heat rises naturally from floor level, distributes evenly without forcing air across the room
  • Fits neatly under a large window where a high-wall unit would block light or views
  • Same efficiency and warranty as the rest of the Mitsubishi Electric range
Good for: older homes, rooms with floor-to-ceiling windows, conservatories

MLZ SlimFit Ceiling Cassette

Ceiling Cassette
  • Sits flush in the ceiling so there is nothing on any wall
  • Airflow angle adjustable to suit your ceiling height, avoids cold air dropping directly onto people
  • Distributes heat evenly across open-plan spaces where a wall unit would only cover one end
  • Slimmer ceiling cutout than older cassette units, easier to retrofit
  • Wifi and remote control as standard
Good for: open-plan living, offices, anywhere wall space is at a premium

Rough Pricing So You Know What to Expect

Every install is different, but these are the typical ranges for supply and installation in Central Auckland in 2026. Your free quote will give you a fixed price for your specific home.

$2,000 – $4,500
High Wall, Single Room

AP Smart or EF Designer. Supply and install. This covers a back-to-back install where the outdoor unit sits directly behind the indoor one. Longer pipe runs are priced up at quote time. No surprises.

$6,000 – $14,000
Multi Room

One outdoor unit, multiple indoor heads. Price varies by number of rooms and pipe run length. Each job is priced individually at quote time.

$8,000 – $20,000
Ducted, Whole Home

Fully hidden in ceiling or floor. Price depends on home size, number of zones and access for ducting. Most popular for new builds and full renovations.

For a full breakdown see our heat pump installation cost guide. The Warmer Kiwi Homes subsidy can reduce the high-wall cost significantly if you qualify.

He Looks at the Room Before He Touches Anything

1

He assesses the room before recommending anything

Most installation problems come down to two things: wrong size and wrong position. Too small and it runs flat out all day. Wrong position and the airflow never reaches the far end. He checks four things before he quotes:

Room size and ceiling height

Determines the kW you actually need, not the closest bracket size.

Insulation and orientation

A north-facing, well-insulated room needs less capacity than a south-facing room with single glazing.

Indoor unit position

Affects whether the heat reaches the whole room or just the end nearest the unit.

Outdoor unit placement

Boundary noise rules, airflow clearance and whether neighbours will hear it at night.

2

The install itself

My Mt Eden specialist holds an EPA Refrigerant Handling Licence. A registered electrician handles all wiring. He applies corrosion protection to every outdoor unit as standard, because Mitsubishi Electric's own warranty documents flag this as a specific risk in New Zealand conditions. It costs you nothing extra.

EPA-licensed refrigerant handling
Registered electrician for all wiring
Corrosion protection on outdoor unit
Boundary noise rules checked
Full app and remote walkthrough before he leaves
House left tidy, 12-month workmanship guarantee
3

He looks after it for as long as you own it

Most installers disappear once the unit is on the wall. He does not. He handles every service and repair for his own customers. Annual service to keep the warranty valid, a question three years down the track, anything that comes up: you call him. He installed it, he knows it, and he will look after it. He does not work on heat pumps he did not install.

Could You Pay as Little as $400 for Your Heat Pump?

The Warmer Kiwi Homes grant covers up to 90% of the cost, capped at $3,450. Most eligible homeowners pay just $400 to $700 out of pocket. My Mt Eden specialist is a registered provider and handles all the paperwork. Takes 2 minutes to check your eligibility.

Check My Eligibility

Mitsubishi Electric Installation FAQ

Which Mitsubishi Electric model is right for my room?

For most rooms the AP Smart is the answer. It is quiet, efficient and well priced. If noise is your priority above everything else, the AP Smart is hard to beat at 18dBA. If the look of the unit matters, the EF Designer gives you colour choices and a slimmer profile. If the room is south-facing or hard to heat, the KW RapidHeat gets there faster and keeps going when it is cold outside. My Mt Eden specialist assesses the room when he comes for the quote and tells you exactly which one fits.

How long does the install take?

A standard high-wall install takes a few hours. Multi-room systems usually take a full day. Ducted systems take one to two days depending on the size of the home. He confirms the timeframe when he comes out for the quote.

Do I need council consent?

Usually not. Heat pump installation is a permitted activity under the Building Act, which means no consent required in most cases. The one thing to watch is how close the outdoor unit ends up to your boundary, because there are noise rules that apply. He checks your site at quote time and flags anything before he starts, not after.

What warranty does a Mitsubishi Electric come with?

Mitsubishi Electric offers a 5-year parts and labour warranty on all residential heat pumps installed in NZ. That covers both the unit and repair labour if something goes wrong with it. The installation work is separately covered by a 12-month workmanship guarantee on top of that.

Who handles servicing and repairs after the install?

Most installers disappear once the unit is on the wall. My Mt Eden specialist does not. He handles every service and repair for his own customers. Call him directly for your annual service, a warranty check, or anything else that comes up. He installed it, he knows it, and he will look after it. He does not do repairs on units other companies installed.

Do you cover the whole of Central Auckland?

Yes. The specialist I recommend covers Mt Eden and the wider Central Auckland area including Grey Lynn, Ponsonby, Kingsland, Epsom, Sandringham, Balmoral, Mt Albert, One Tree Hill, Royal Oak, Three Kings and surrounding suburbs. Call to confirm your suburb is covered.

Mitsubishi Heat Pump Installation in Mt Eden

Get a free quote from the Central Auckland specialist I trust. He will tell you which Mitsubishi model suits your room and what it will actually cost — no pushy sales, no brand lock-in.